pass element
英 [pɑːs ˈelɪmənt]
美 [pæs ˈelɪmənt]
网络 导通器件; 旁路元件; 导通组件; 调整管; 传输元件
双语例句
- This would be desirable if you want to have some flexibility in your plug-in, allowing users to pass in any type of page element.
如果您希望插件更加灵活，允许用户传入任何类型的页面元素，那么最好使用方法。 - To pass on information to the application, DOM creates a tree of objects that duplicates exactly the tree of elements from the XML file, with every XML element being a node in the tree.
为了把信息传递给应用程序，DOM创建和XML文件元素树完全相同的对象树，每个XML元素都用树中的一个节点表示。 - To build a list, you simply pass an element to another list.
构建列表时，只是把元素传递给另一个列表。 - Notice that we had to pass only the root element when we invoked the buildZip function.
注意：在调用buildZip函数时，仅需要传递根元素。 - A number of different signatures are available for http: send-request: I prefer to use the following one, where you pass in an http: element that represents the HTTP request that you want to make
send-request有很多不同的识别标志可用：我喜欢使用下面这一个，在这里您传入一个http：element，代表您想要发出的HTTP请求 - API call where we pass in the name of the FORM element as a parameter to the API call.
在此调用中，我们将FORM元素的名称作为一个参数传递给API调用。 - Attachment verification points return a Pass status when all of the criteria of an attachment match the expected criteria specified in the verification point test element.
当一个附件所有的标准与验证点测试元素指定的所期望的标准匹配时，附属验证点返回一个Pass状态。 - Therefore, you must pass it a root element when you create it.
因此，创建Document时，必须给它传递一个根元素。 - More often than not, though, it's easiest to pass in the DOM document element and write your expressions from there.
但通常不这样做，传入DOM文档元素，然后从这里开始编写表达式是最简单的办法。 - You pass a formula used as a predicate to see if it is a valid rule for the element.
您传递一个用作谓词的公式，检查它是否是一个有效的元素规则。 - The observation is, thank you, on the first pass through, the last element is the biggest thing in the list.
，在第一遍，你能观测到的是，最后一个元素，是列表里最大的，在下一遍，下一大的元素，在列表的第二位。 - They also pass information to the lead element.
他们同时也向指挥核心传递信息。 - The deformation of rolled piece in conjugate deep cut pass is simulated by finite element method. The error of simulated result is less than 1%.
用有限元法对共轭切深孔中轧件的变形进行了计算机模拟，模拟计算结果误差小于1%。 - E/ D NMOS reference is adopted and a PMOS transistor is used as pass element in the design.
电路设计中，采用E/DNMOS基准，用PMOS管作调整管； - Design of pass and finite element analysis on large round bar in bloom mill
初轧机轧制大圆钢孔型设计与有限元分析 - Analytic expressions for aperture output mode of a multiple pass ring resonator have been derived using ABCD matrices and diffraction integral function of multi element resonator.
利用多元件腔的衍射积分方程及光学ABCD定律，得出了多程环形腔小孔耦合输出模式的相关计算公式。 - Analysis of constrained spread for angle steel butterfly pass with three dimensional finite element method
角钢蝶式孔限制宽展的三维有限元分析 - The process of pass filling dynamical multi-layer welding is realized by the method of loading-on welding heat source and using "Element Birth and Death" in ANSYS.
基于ANSYS软件，利用生死单元技术与施加内部体热源的方法实现了多层焊焊缝填充过程的模拟，完成了对接接头多层焊的数值分析。 - Besides, the distribution of rolling force, stress, strain and temperature during the first pass of E1-R1 were also analyzed with thermal-mechanical coupling method by three dimension thermal elastic-plastic FEM. The finite element model was erected according to practical condition.
此外，还采用三维热弹塑性有限元对E1-R1第一道次轧制过程进行了热力耦合解析，分析了轧制过程中轧制力、应力、应变的分布及轧件的温度场分布。 - Development of an expert system for roll forming pass design based on the shape element idea
基于断面特征形状单元的冷弯型钢辊型设计专家系统研究与开发 - Simulation of Square Billet Rolling in Box Pass by Explicit Dynamics Finite Element Method
箱型孔轧制方坯的显式动力学有限元模拟 - The paper applies the similar rule to analyze the last pass cover welding by finite element analysis.
本文采用相似准则，利用有限元法对磨机筒体最后一道盖面层焊进行分析。 - Calculation and Analysis for the Flow pass a Multi-element Wing
三维多段机翼复杂流场的计算和分析 - At the same time, it realized the process of pass filling dynamical welding by using Element Birth and Death in the ANSYS.
利用ANSYS中生死单元技术实现了多道焊焊缝填充的动态过程； - This article discuss how to calculate volume of revolving body formed the plane figure to circle willfully the straight line did not pass through its interior to revolve a week, through the element analytic method and the use double integral, then obtains the general integral formula.
通过微元法讨论如何用二重积分计算平面图形绕任意不穿过其内部的共面直线旋转一周所成旋转体的体积的一般方法，进而得出一般积分公式。 - The deformation process of heavy rail at 800-I pass has been simulated using nonlinear finite-element software MARC/ AutoForge by three dimensional thermo-mechanical coupled elastoplastic finite element method ( FEM), and the equivalent stress and strain field, temperature field and rolling force of rolling billet were analyzed.
采用非线性有限元软件MarcAutoforge，通过三维弹塑性热力耦合的有限元方法模拟了重轨800I孔的变形过程，分析了轧件上等效应力、应变场、温度场和轧制力。 - The essence of the elements apply to the new Chinese furniture design, and fashion elements to various aspects of innovation, application metaphor design techniques to achieve the "pass intended form," summed up the creative element in a variety of innovative methods.
然后将特征元素精髓应用到新中式家具设计实践中，并对元素的各方面加以时尚创新，运用隐喻设计手法，达到以意传形，总结出各种创新元素的创作应用方法。 - To make sure the stability and lower the transient overshoot of the LDO, a buffer stage is used to isolate the pass element and the output of the error amplifier.
为了保证系统的稳定性以及减小系统的输出瞬时过冲，本文设计了输出缓冲级来隔离误差放大器的高阻抗输出节点与通路器件的栅极。 - Establish a multiple pass weld heat filed model with the ANSYS software. The model used element life and death technology, considered the heat emission, heat exchange, latent heat of phase change, and the influence of horizontal position.
并利用ANSYS软件建立了横焊模型，该模型考虑了焊接过程中热辐射、热传导、相变潜热以及横焊位置对温度场的影响，应用了单元生死技术模拟焊道填充。